Alveolar Gas ExchangeArtboard 2@2x

Menu

Gestational Day 130 Fetal Monkey HOPX, ABCA3, and ACTA2 Confocal Imaging

By |2017-04-28T19:08:01+00:00April 27th, 2017|Categories: Fetal Monkey, GA130|Tags: , , , , |0 Comments
Read More

Gestational Day 105 Fetal Monkey HOPX, ABCA3, and ACTA2 Confocal Imaging

By |2017-04-28T18:53:42+00:00April 27th, 2017|Categories: Fetal Monkey, GA 105|Tags: , , , , |0 Comments
Read More

2 Year Human Lung NKX2.1, ABCA3, and ACTA2 Confocal Imaging

2 Year Human Lung NKX2.1, ABCA3, and ACTA2 Confocal Imaging

  Donor Tissue Kindly Provided by Dr. Gloria Pryhuber from the University of Rochester Medical Center

Pryhuber_Lab

Immunofluorescence- NKX2.1, ABCA3, and ACTA2

 

Purpose:  Stain slides of 5µm paraffin sections of human lung received from the HTC for NKX2.1, ABCA3, and ACTA2 with antigen retrieval.

Day 1

  1. Paraffin sections are placed at 60oC for 2 hours to overnight to melt paraffin.
  2. Paraffin sections are then placed in xylene 3X for 10 minutes each, followed by 3X in 100% ETOH for 3 minutes each, 95% ETOH for 3 minutes each, and 70% ETOH for 3 minutes each. Slides are then placed in 1X PBS for 5 minutes to completely rehydrate tissue.
  3. Briefly equilibrate slides in Antigen Retrieval Buffer.
  4. Antigen retrieval, pH 6.0 (times will vary according to microwave).
  5. 10 mM sodium citrate, pH 6.0, and heat in a microwave at 96oC. *We usually do a series of three runs (6-7 minutes each run) to equal the time/temp because of evaporation (refill coplin jars with dH2O).
  6. Microwave according to instructions on microwave.
  7. Cool on countertop, 15 min.
  8. Rinse with dH2O
  9. 1X PBS, 5 min.
  10. Block in 4% Goat serum/PBS-T, 2 hours at RT.
  11. For rabbit anti-NKX2.1 (RB TTF-1 1231, Lot# 0912A) dilute 1:1000, for mouse anti-ABCA3 (WMAB-17G524, Seven Hills Bioreagents) dilute 1:100, for mouse anti-ACTA2 (α Smooth muscle actin, A5228, Sigma) dilute 1:2000 in blocking buffer. Spin down in µfuge for 10 minutes and incubate on tissue overnight @ 4oC.

Day 2                                                                                                               

  1. Rinse slides in PBS-T 3X, 5 min.
  2. Apply secondary antibody, Goat Alexa Fluor 488 anti-rabbit IgG (A11034, Lot# 1298480, for anti- NKX2.1), Goat Alexa Fluor 568 anti-mouse pig IgG2B (A21144, Lot# 1584300, for anti-ABCA3) at 1:200, Donkey Alexa Fluor 633 anti-mouse IgG2A (A21136, Lot# 1345055, ACTA2) at 1:200, in blocking buffer. Spin down in µfuge for 10 min, apply to tissue and incubated at room temperature for 1 hour.
  3. Rinse in PBS-T 3X, 5 min.
  4. Dilute DAPI 1:2000 and apply to slides for 10 min.
  5. Wash in PBS-T 3X, 5 min.
  6. Rinse slides in 0.1M PB or TB, 3X, 5 min.
  7. Add 1 drop of Prolong Gold anti-fade mounting medium (P36930).
  8. Coverslip with Gold Seal Coverslip (Cat# 3422 Electron Microscopy Sciences, 22 X 22 mm).
  9. Allow Prolong Gold to cure overnight at room temp in light sealed box.
  10. Store at 40C until imaging.

 

Tissue Used:
LMH-D022-RLL-6B2.18
Gender: Male
Age: 2 Years
Gestational Age at Birth:  36 weeks

 

Appendix
Antigen Retrieval Solution

18ml Solution A- 0.1M Citric Acid (Sigma, C1909) pH 2.5

82ml Reagent B- 0.1M Sodium Citrate (Sigma, S4641 ) pH 8.2

1L dH2O

pH 6.0

Related Experiments

By |2018-09-24T13:45:52+00:00April 19th, 2017|Categories: 02 Year-Old, Postnatal Human Lung|Tags: , , , , , |0 Comments
Read More

2 Year Human Lung HOPX, ABCA3, and ACTA2 Confocal Imaging

2 Year Human Lung HOPX, ABCA3, and ACTA2 Confocal Imaging

  Donor Tissue Kindly Provided by Dr. Gloria Pryhuber from the University of Rochester Medical Center

Pryhuber_Lab

Immunofluorescence- HOPX, ABCA3, and ACTA2

 

Purpose:  Stain slides of 5µm paraffin sections of human lung received from the HTC for HOPX, ABCA3, and ACTA2 with antigen retrieval.

Day 1

  1. Paraffin sections are placed at 60oC for 2 hours to overnight to melt paraffin.
  2. Paraffin sections are then placed in xylene 3X for 10 minutes each, followed by 3X in 100% ETOH for 3 minutes each, 95% ETOH for 3 minutes each, and 70% ETOH for 3 minutes each. Slides are then placed in 1X PBS for 5 minutes to completely rehydrate tissue.
  3. Briefly equilibrate slides in Antigen Retrieval Buffer.
  4. Antigen retrieval, pH 6.0 (times will vary according to microwave).
  5. 10 mM sodium citrate, pH 6.0, and heat in a microwave at 96oC. *We usually do a series of three runs (6-7 minutes each run) to equal the time/temp because of evaporation (refill coplin jars with dH2O).
  6. Microwave according to instructions on microwave.
  7. Cool on countertop, 15 min.
  8. Rinse with dH2O
  9. 1X PBS, 5 min.
  10. Block in 4% Goat serum/PBS-T, 2 hours at RT.
  11. For anti-HOPX (SC-30216, Lot # C2212, Santa Cruz) dilute 1:200, for mouse anti-ABCA3 (WMAB-17G524, Seven Hills Bioreagents) dilute 1:100, for mouse anti-ACTA2 (α Smooth muscle actin, A5228, Sigma) dilute 1:2000 in blocking buffer. Spin down in µfuge for 10 minutes and incubate on tissue overnight @ 4oC.

Day 2                                                                                                               

  1. Rinse slides in PBS-T 3X, 5 min.
  2. Apply secondary antibody, Goat Alexa Fluor 488 anti-rabbit IgG (A11034, Lot# 1298480, for anti- HOPX), Goat Alexa Fluor 568 anti-mouse pig IgG2B (A21144, Lot# 1584300, for anti-ABCA3) at 1:200, Donkey Alexa Fluor 633 anti-mouse IgG2A (A21136, Lot# 1345055, ACTA2) at 1:200, in blocking buffer. Spin down in µfuge for 10 min, apply to tissue and incubated at room temperature for 1 hour.
  3. Rinse in PBS-T 3X, 5 min.
  4. Dilute DAPI 1:2000 and apply to slides for 10 min.
  5. Wash in PBS-T 3X, 5 min.
  6. Rinse slides in 0.1M PB or TB, 3X, 5 min.
  7. Add 1 drop of Prolong Gold anti-fade mounting medium (P36930).
  8. Coverslip with Gold Seal Coverslip (Cat# 3422 Electron Microscopy Sciences, 22 X 22 mm).
  9. Allow Prolong Gold to cure overnight at room temp in light sealed box.
  10. Store at 4oC until imaging.

 

Tissue Used:
LMH-16-D022-RLL-4A2.8
Gender: Male
Age: 2 Years
Gestational Age at Birth:  36 weeks

 

Appendix
Antigen Retrieval Solution

18ml Solution A- 0.1M Citric Acid (Sigma, C1909) pH 2.5

82ml Reagent B- 0.1M Sodium Citrate (Sigma, S4641 ) pH 8.2

1L dH2O

pH 6.0

Related Experiments

By |2018-09-24T13:37:44+00:00April 19th, 2017|Categories: 02 Year-Old, Postnatal Human Lung|Tags: , , , , |0 Comments
Read More

3 Year Human Lung SFTPC, ABCA3, and ACTA2 Confocal Imaging

3 Year Human Lung SFTPC, ABCA3, and ACTA2 Confocal Imaging

  Donor Tissue Kindly Provided by Dr. Gloria Pryhuber from the University of Rochester Medical Center

Pryhuber_Lab

Immunofluorescence- SFTPC, ABCA3, and ACTA2

 

Purpose:  Stain slides of 5µm paraffin sections of human lung from the HTC for SFTPC, ABCA3, and ACTA2 with antigen retrieval.

 

Day 1

  1. Paraffin sections are placed at 60oC for 2 hours to overnight to melt paraffin.
  2. Paraffin sections are then placed in xylene 3X for 10 minutes each, followed by 3X in 100% ETOH for 3 minutes each, 95% ETOH for 3 minutes each, and 70% ETOH for 3 minutes each. Slides are then placed in 1X PBS for 5 minutes to completely rehydrate tissue.
  3. Briefly equilibrate slides in Antigen Retrieval Buffer.
  4. Antigen retrieval, pH 6.0 (times will vary according to microwave).
  5. 10 mM sodium citrate, pH 6.0, and heat in a microwave at 96oC. *We usually do a series of three runs (6-7 minutes each run) to equal the time/temp because of evaporation (refill coplin jars with dH2O).
  6. Microwave according to instructions on microwave.
  7. Cool on countertop, 15 min.
  8. Rinse with dH2O
  9. 1X PBS, 5 min.
  10. Block in 4% Goat serum/PBS-T, 2 hours at RT.
  11. For Rabbit SFTPC (RB 458 in House, BL 3-23-11) dilute 1:500, for mouse anti-ABCA3 (WMAB-17G524, Seven Hills Bioreagents) dilute 1:100, for mouse anti-ACTA2 (α Smooth muscle actin, A5228, Sigma) dilute 1:2000 in blocking buffer. Spin down in µfuge for 10 minutes and incubate on tissue overnight @ 4oC.

Day 2

  1. Rinse slides in PBS-T 3X, 5 min.
  2. Apply secondary antibody, Goat Alexa Fluor 488 anti-rabbit IgG (A11034, Lot# 1298480,  for anti-SFTPC), Goat Alexa Fluor 568 anti-mouse pig IgG2B (A21144, Lot# 1584300, for anti-ABCA3) at 1:200, Donkey Alexa Fluor 633 anti-mouse IgG2A A21136, Lot# 1345055, ACTA2) at 1:200, in blocking buffer. Spin down in µfuge for 10 min, apply to tissue and incubated at room temperature for 1 hour.
  3. Rinse in PBS-T 3X, 5 min.
  4. Dilute DAPI 1:2000 and apply to slides for 10 min.
  5. Wash in PBS-T 3X, 5 min.
  6. Rinse slides in 0.1M PB or TB, 3X, 5 min.
  7. Add 1 drop of Prolong Gold anti-fade mounting medium (P36930).
  8. Coverslip with Gold Seal Coverslip (Cat# 3422 Electron Microscopy Sciences, 22 X 22 mm).
  9. Allow Prolong Gold to cure overnight at room temp in light sealed box.
  10. Store slides in light-sealed box at 4oC.

 

Tissue Used:
LMH-16-D015-RLL-4B2.22
Gender: Female
Age: 3 Years
Gestational Age at Birth:  25 weeks

                       

Appendix
Antigen Retrieval Solution

18ml Solution A- 0.1M Citric Acid (Sigma, C1909) pH 2.5

82ml Reagent B- 0.1M Sodium Citrate (Sigma, S4641 ) pH 8.2

1L dH2O

pH 6.0

Related Experiments

By |2018-10-17T13:24:55+00:00April 17th, 2017|Categories: BPD, Lung Diseases, Postnatal Human Lung|Tags: , , , , , |0 Comments
Read More

3 Year Human Lung SFTPC, ABCA3, and ACTA2 Confocal Imaging

3 Year Human Lung SFTPC, ABCA3, and ACTA2 Confocal Imaging

  Donor Tissue Kindly Provided by Dr. Gloria Pryhuber from the University of Rochester Medical Center

Pryhuber_Lab

Immunofluorescence- SFTPC, ABCA3, and ACTA2

 

Purpose:  Stain slides of 5µm paraffin sections of human lung from the HTC for SFTPC, ABCA3, and ACTA2 with antigen retrieval.

Day 1

  1. Paraffin sections are placed at 60oC for 2 hours to overnight to melt paraffin.
  2. Paraffin sections are then placed in xylene 3X for 10 minutes each, followed by 3X in 100% ETOH for 3 minutes each, 95% ETOH for 3 minutes each, and 70% ETOH for 3 minutes each. Slides are then placed in 1X PBS for 5 minutes to completely rehydrate tissue.
  3. Briefly equilibrate slides in Antigen Retrieval Buffer.
  4. Antigen retrieval, pH 6.0 (times will vary according to microwave).
  5. 10 mM sodium citrate, pH 6.0, and heat in a microwave at 96oC. *We usually do a series of three runs (6-7 minutes each run) to equal the time/temp because of evaporation (refill coplin jars with dH2O).
  6. Microwave according to instructions on microwave.
  7. Cool on countertop, 15 min.
  8. Rinse with dH2O
  9. 1X PBS, 5 min.
  10. Block in 4% Goat serum/PBS-T, 2 hours at RT.
  11. For Rabbit SFTPC (RB 458 in House, BL 3-23-11) dilute 1:500, for mouse anti-ABCA3 (WMAB-17G524, Seven Hills Bioreagents) dilute 1:100, for mouse anti-ACTA2 (α Smooth muscle actin, A5228, Sigma) dilute 1:2000 in blocking buffer. Spin down in µfuge for 10 minutes and incubate on tissue overnight @ 4oC.

Day 2

  1. Rinse slides in PBS-T 3X, 5 min.
  2. Apply secondary antibody, Goat Alexa Fluor 488 anti-rabbit IgG (A11034, Lot# 1298480,  for anti-SFTPC), Goat Alexa Fluor 568 anti-mouse pig IgG2B (A21144, Lot# 1584300, for anti-ABCA3) at 1:200, Donkey Alexa Fluor 633 anti-mouse IgG2A A21136, Lot# 1345055, ACTA2) at 1:200, in blocking buffer. Spin down in µfuge for 10 min, apply to tissue and incubated at room temperature for 1 hour.
  3. Rinse in PBS-T 3X, 5 min.
  4. Dilute DAPI 1:2000 and apply to slides for 10 min.
  5. Wash in PBS-T 3X, 5 min.
  6. Rinse slides in 0.1M PB or TB, 3X, 5 min.
  7. Add 1 drop of Prolong Gold anti-fade mounting medium (P36930).
  8. Coverslip with Gold Seal Coverslip (Cat# 3422 Electron Microscopy Sciences, 22 X 22 mm).
  9. Allow Prolong Gold to cure overnight at room temp in light sealed box.
  10. Store slides in light-sealed box at 4oC.

 

 

Tissue Used:
LMH-16-D053-RLL-13B2.25
Gender: Male
Age: 3 Years
Gestational Age at Birth:  24 weeks

 

Appendix
Antigen Retrieval Solution

18ml Solution A- 0.1M Citric Acid (Sigma, C1909) pH 2.5

82ml Reagent B- 0.1M Sodium Citrate (Sigma, S4641 ) pH 8.2

1L dH2O

pH 6.0

Related Experiments

By |2018-10-17T13:36:18+00:00April 17th, 2017|Categories: BPD Confocal Imaging, Human Lung Disease Confocal Imaging, Postnatal Human Lung|Tags: , , , , , |0 Comments
Read More

2 Year Human Lung SFTPC, ABCA3, and ACTA2 Confocal Imaging

2 Year Human Lung SFTPC, ABCA3, and ACTA2 Confocal Imaging

  Donor Tissue Kindly Provided by Dr. Gloria Pryhuber from the University of Rochester Medical Center

Pryhuber_Lab

Immunofluorescence- SFTPC, ABCA3, and ACTA2

 

Purpose:  Stain slides of 5µm paraffin sections of human lung from the HTC for SFTPC, ABCA3, and ACTA2 with antigen retrieval.

Day 1

  1. Paraffin sections are placed at 60oC for 2 hours to overnight to melt paraffin.
  2. Paraffin sections are then placed in xylene 3X for 10 minutes each, followed by 3X in 100% ETOH for 3 minutes each, 95% ETOH for 3 minutes each, and 70% ETOH for 3 minutes each. Slides are then placed in 1X PBS for 5 minutes to completely rehydrate tissue.
  3. Briefly equilibrate slides in Antigen Retrieval Buffer.
  4. Antigen retrieval, pH 6.0 (times will vary according to microwave).
  5. 10 mM sodium citrate, pH 6.0, and heat in a microwave at 96oC. *We usually do a series of three runs (6-7 minutes each run) to equal the time/temp because of evaporation (refill coplin jars with dH2O).
  6. Microwave according to instructions on microwave.
  7. Cool on countertop, 15 min.
  8. Rinse with dH2O
  9. 1X PBS, 5 min.
  10. Block in 4% Goat serum/PBS-T, 2 hours at RT.
  11. For Rabbit SFTPC (RB 458 in House, BL 3-23-11) dilute 1:500, for mouse anti-ABCA3 (WMAB-17G524, Seven Hills Bioreagents) dilute 1:100, for mouse anti-ACTA2 (α Smooth muscle actin, A5228, Sigma) dilute 1:2000 in blocking buffer. Spin down in µfuge for 10 minutes and incubate on tissue overnight @ 4oC.

Day 2

  1. Rinse slides in PBS-T 3X, 5 min.
  2. Apply secondary antibody, Goat Alexa Fluor 488 anti-rabbit IgG (A11034, Lot# 1298480,  for anti-SFTPC), Goat Alexa Fluor 568 anti-mouse pig IgG2B (A21144, Lot# 1584300, for anti-ABCA3) at 1:200, Donkey Alexa Fluor 633 anti-mouse IgG2A A21136, Lot# 1345055, ACTA2) at 1:200, in blocking buffer. Spin down in µfuge for 10 min, apply to tissue and incubated at room temperature for 1 hour.
  3. Rinse in PBS-T 3X, 5 min.
  4. Dilute DAPI 1:2000 and apply to slides for 10 min.
  5. Wash in PBS-T 3X, 5 min.
  6. Rinse slides in 0.1M PB or TB, 3X, 5 min.
  7. Add 1 drop of Prolong Gold anti-fade mounting medium (P36930).
  8. Coverslip with Gold Seal Coverslip (Cat# 3422 Electron Microscopy Sciences, 22 X 22 mm).
  9. Allow Prolong Gold to cure overnight at room temp in light sealed box.
  10. Store slides in light-sealed box at 4oC.

 

Tissue Used:
LMH-16-D022-RLL-6B2.10
Gender: Male
Age: 2 Years
Gestational Age at Birth:  36 weeks

 

Appendix
Antigen Retrieval Solution

18ml Solution A- 0.1M Citric Acid (Sigma, C1909) pH 2.5

82ml Reagent B- 0.1M Sodium Citrate (Sigma, S4641 ) pH 8.2

1L dH2O

pH 6.0

Related Experiments

By |2018-11-29T14:26:48+00:00April 17th, 2017|Categories: 02 Year-Old, Postnatal Human Lung|Tags: , , , , , |0 Comments
Read More

2 Year Human Lung SFTPC, ABCA3, and ACTA2 Confocal Imaging

2 Year Human Lung SFTPC, ABCA3, and ACTA2 Confocal Imaging

Donor Tissue Kindly Provided by Dr. Gloria Pryhuber from the University of Rochester Medical Center

Pryhuber_Lab

Immunofluorescence- SFTPC, ABCA3, and ACTA2

 

Purpose:  Stain slides of 5µm paraffin sections of human lung from the HTC for SFTPC, ABCA3, and ACTA2 with antigen retrieval.

Day 1

  1. Paraffin sections are placed at 60oC for 2 hours to overnight to melt paraffin.
  2. Paraffin sections are then placed in xylene 3X for 10 minutes each, followed by 3X in 100% ETOH for 3 minutes each, 95% ETOH for 3 minutes each, and 70% ETOH for 3 minutes each. Slides are then placed in 1X PBS for 5 minutes to completely rehydrate tissue.
  3. Briefly equilibrate slides in Antigen Retrieval Buffer.
  4. Antigen retrieval, pH 6.0 (times will vary according to microwave).
  5. 10 mM sodium citrate, pH 6.0, and heat in a microwave at 96oC. *We usually do a series of three runs (6-7 minutes each run) to equal the time/temp because of evaporation (refill coplin jars with dH2O).
  6. Microwave according to instructions on microwave.
  7. Cool on countertop, 15 min.
  8. Rinse with dH2O
  9. 1X PBS, 5 min.
  10. Block in 4% Goat serum/PBS-T, 2 hours at RT.
  11. For Rabbit SFTPC (RB 458 in House, BL 3-23-11) dilute 1:500, for mouse anti-ABCA3 (WMAB-17G524, Seven Hills Bioreagents) dilute 1:100, for mouse anti-ACTA2 (α Smooth muscle actin, A5228, Sigma) dilute 1:2000 in blocking buffer. Spin down in µfuge for 10 minutes and incubate on tissue overnight @ 4oC.

Day 2

  1. Rinse slides in PBS-T 3X, 5 min.
  2. Apply secondary antibody, Goat Alexa Fluor 488 anti-rabbit IgG (A11034, Lot# 1298480,  for anti-SFTPC), Goat Alexa Fluor 568 anti-mouse pig IgG2B (A21144, Lot# 1584300, for anti-ABCA3) at 1:200, Donkey Alexa Fluor 633 anti-mouse IgG2A A21136, Lot# 1345055, ACTA2) at 1:200, in blocking buffer. Spin down in µfuge for 10 min, apply to tissue and incubated at room temperature for 1 hour.
  3. Rinse in PBS-T 3X, 5 min.
  4. Dilute DAPI 1:2000 and apply to slides for 10 min.
  5. Wash in PBS-T 3X, 5 min.
  6. Rinse slides in 0.1M PB or TB, 3X, 5 min.
  7. Add 1 drop of Prolong Gold anti-fade mounting medium (P36930).
  8. Coverslip with Gold Seal Coverslip (Cat# 3422 Electron Microscopy Sciences, 22 X 22 mm).
  9. Allow Prolong Gold to cure overnight at room temp in light sealed box.
  10. Store slides in light-sealed box at 4oC.

 

Tissue Used:
LMH-16-D022-RLL-6B2.10
Gender: Male
Age: 2 Years
Gestational Age at Birth:  36 weeks

 

Appendix
Antigen Retrieval Solution

18ml Solution A- 0.1M Citric Acid (Sigma, C1909) pH 2.5

82ml Reagent B- 0.1M Sodium Citrate (Sigma, S4641 ) pH 8.2

1L dH2O

pH 6.0

Related Experiments

By |2018-09-24T13:31:12+00:00April 17th, 2017|Categories: 02 Year-Old, Homo sapiens Confocal Imaging|Tags: , , , , , |0 Comments
Read More

3 Year Human Lung SFTPC, ABCA3, and ACTA2 Confocal Imaging

Donor Tissue Kindly Provided by Dr. Gloria Pryhuber from the University of Rochester Medical Center

Pryhuber_Lab

 

Gene
Sftpc LungGens Ensemble Genecards NCBI The Human Protein Atlas
ABCA3 LungGens Ensemble Genecards NCBI The Human Protein Atlas
Acta2 LungGens Ensemble Genecards NCBI The Human Protein Atlas

 

Immunofluorescence- SFTPC, ABCA3, and ACTA2

 

Purpose:  Stain slides of 5µm paraffin sections of human lung from the HTC for SFTPC, ABCA3, and ACTA2 with antigen retrieval.

Day 1

  1. Paraffin sections are placed at 60oC for 2 hours to overnight to melt paraffin.
  2. Paraffin sections are then placed in xylene 3X for 10 minutes each, followed by 3X in 100% ETOH for 3 minutes each, 95% ETOH for 3 minutes each, and 70% ETOH for 3 minutes each. Slides are then placed in 1X PBS for 5 minutes to completely rehydrate tissue.
  3. Briefly equilibrate slides in Antigen Retrieval Buffer.
  4. Antigen retrieval, pH 6.0 (times will vary according to microwave).
  5. 10 mM sodium citrate, pH 6.0, and heat in a microwave at 96oC. *We usually do a series of three runs (6-7 minutes each run) to equal the time/temp because of evaporation (refill coplin jars with dH2O).
  6. Microwave according to instructions on microwave.
  7. Cool on countertop, 15 min.
  8. Rinse with dH2O
  9. 1X PBS, 5 min.
  10. Block in 4% Goat serum/PBS-T, 2 hours at RT.
  11. For Rabbit SFTPC (RB 458 in House, BL 3-23-11) dilute 1:500, for mouse anti-ABCA3 (WMAB-17G524, Seven Hills Bioreagents) dilute 1:100, for mouse anti-ACTA2 (α Smooth muscle actin, A5228, Sigma) dilute 1:2000 in blocking buffer. Spin down in µfuge for 10 minutes and incubate on tissue overnight @ 4oC.

Day 2

  1. Rinse slides in PBS-T 3X, 5 min.
  2. Apply secondary antibody, Goat Alexa Fluor 488 anti-rabbit IgG (A11034, Lot# 1298480,  for anti-SFTPC), Goat Alexa Fluor 568 anti-mouse pig IgG2B (A21144, Lot# 1584300, for anti-ABCA3) at 1:200, Donkey Alexa Fluor 633 anti-mouse IgG2A A21136, Lot# 1345055, ACTA2) at 1:200, in blocking buffer. Spin down in µfuge for 10 min, apply to tissue and incubated at room temperature for 1 hour.
  3. Rinse in PBS-T 3X, 5 min.
  4. Dilute DAPI 1:2000 and apply to slides for 10 min.
  5. Wash in PBS-T 3X, 5 min.
  6. Rinse slides in 0.1M PB or TB, 3X, 5 min.
  7. Add 1 drop of Prolong Gold anti-fade mounting medium (P36930).
  8. Coverslip with Gold Seal Coverslip (Cat# 3422 Electron Microscopy Sciences, 22 X 22 mm).
  9. Allow Prolong Gold to cure overnight at room temp in light sealed box.
  10. Store slides in light-sealed box at 4oC.

 

Tissue Used:   

LMH-16-D039-RLL-7A2.15

Gender: Female

Age: 39 Months

Gestational Age at Birth:  23 weeks

 

Appendix

 

Antigen Retrieval Solution

18ml Solution A- 0.1M Citric Acid (Sigma, C1909) pH 2.5

82ml Reagent B- 0.1M Sodium Citrate (Sigma, S4641 ) pH 8.2

1L dH2O

pH 6.0

By |2017-04-17T15:15:33+00:00April 17th, 2017|Categories: BPD, Lung Diseases, Postnatal Human Lung|Tags: , , , , , |0 Comments
Read More

3 Year Human Lung SFTPC, ABCA3, and ACTA2 Confocal Imaging

3 Year Human Lung SFTPC, ABCA3, and ACTA2 Confocal Imaging

  Donor Tissue Kindly Provided by Dr. Gloria Pryhuber from the University of Rochester Medical Center

Pryhuber_Lab

Immunofluorescence- SFTPC, ABCA3, and ACTA2

 

Purpose:  Stain slides of 5µm paraffin sections of human lung from the HTC for SFTPC, ABCA3, and ACTA2 with antigen retrieval.

Day 1

  1. Paraffin sections are placed at 60oC for 2 hours to overnight to melt paraffin.
  2. Paraffin sections are then placed in xylene 3X for 10 minutes each, followed by 3X in 100% ETOH for 3 minutes each, 95% ETOH for 3 minutes each, and 70% ETOH for 3 minutes each. Slides are then placed in 1X PBS for 5 minutes to completely rehydrate tissue.
  3. Briefly equilibrate slides in Antigen Retrieval Buffer.
  4. Antigen retrieval, pH 6.0 (times will vary according to microwave).
  5. 10 mM sodium citrate, pH 6.0, and heat in a microwave at 96oC. *We usually do a series of three runs (6-7 minutes each run) to equal the time/temp because of evaporation (refill coplin jars with dH2O).
  6. Microwave according to instructions on microwave.
  7. Cool on countertop, 15 min.
  8. Rinse with dH2O
  9. 1X PBS, 5 min.
  10. Block in 4% Goat serum/PBS-T, 2 hours at RT.
  11. For Rabbit SFTPC (RB 458 in House, BL 3-23-11) dilute 1:500, for mouse anti-ABCA3 (WMAB-17G524, Seven Hills Bioreagents) dilute 1:100, for mouse anti-ACTA2 (α Smooth muscle actin, A5228, Sigma) dilute 1:2000 in blocking buffer. Spin down in µfuge for 10 minutes and incubate on tissue overnight @ 4oC.

Day 2

  1. Rinse slides in PBS-T 3X, 5 min.
  2. Apply secondary antibody, Goat Alexa Fluor 488 anti-rabbit IgG (A11034, Lot# 1298480,  for anti-SFTPC), Goat Alexa Fluor 568 anti-mouse pig IgG2B (A21144, Lot# 1584300, for anti-ABCA3) at 1:200, Donkey Alexa Fluor 633 anti-mouse IgG2A A21136, Lot# 1345055, ACTA2) at 1:200, in blocking buffer. Spin down in µfuge for 10 min, apply to tissue and incubated at room temperature for 1 hour.
  3. Rinse in PBS-T 3X, 5 min.
  4. Dilute DAPI 1:2000 and apply to slides for 10 min.
  5. Wash in PBS-T 3X, 5 min.
  6. Rinse slides in 0.1M PB or TB, 3X, 5 min.
  7. Add 1 drop of Prolong Gold anti-fade mounting medium (P36930).
  8. Coverslip with Gold Seal Coverslip (Cat# 3422 Electron Microscopy Sciences, 22 X 22 mm).
  9. Allow Prolong Gold to cure overnight at room temp in light sealed box.
  10. Store slides in light-sealed box at 4oC.

 

 

Tissue Used:
LMH-16-D039-RLL-7A2.15
Gender: Female
Age: 39 Months
Gestational Age at Birth:  23 weeks

 

Appendix
Antigen Retrieval Solution

18ml Solution A- 0.1M Citric Acid (Sigma, C1909) pH 2.5

82ml Reagent B- 0.1M Sodium Citrate (Sigma, S4641 ) pH 8.2

1L dH2O

pH 6.0

Related Experiments

By |2018-10-17T13:31:41+00:00April 17th, 2017|Categories: BPD, Lung Diseases, Postnatal Human Lung|Tags: , , , , , |0 Comments
Read More

Alveolar type II cells, also known as type II pneumocytes, are specialized epithelial cells found in the alveoli of the lungs, which are the tiny air sacs responsible for gas exchange. These cells play a crucial role in maintaining the structure and function of the respiratory system.

Alveolar type II cells are located within the alveolar walls of the lungs.

Alveolar type II cells are cuboidal or squamous in shape and are smaller than alveolar type I cells, which are responsible for gas exchange. They are characterized by the presence of microvilli on their apical surface, which increases their surface area for various functions.

One of the most important functions of alveolar type II cells is the production and secretion of pulmonary surfactant. Surfactant is a complex mixture of lipids and proteins that reduces the surface tension of the alveolar fluid, preventing the collapse of alveoli during exhalation. This property is crucial for maintaining the stability of the alveoli and preventing lung collapse, particularly at the end of expiration.

Alveolar type II cells serve as progenitor cells for alveolar type I cells. They have the ability to self-renew and differentiate into type I cells, helping in the repair and regeneration of the alveolar epithelium after injury or damage. This regenerative capacity is essential for maintaining the integrity of the respiratory barrier.

Alveolar type II cells also play a role in the innate immune response of the lungs. They can produce and secrete various immune molecules, including cytokines, chemokines, and antimicrobial peptides, in response to pathogens or inflammatory stimuli. These molecules help to recruit immune cells to the site of infection and promote the clearance of pathogens from the lungs.

Alveolar type II cells are involved in the regulation of ion and fluid balance within the alveoli. They express various ion channels and transporters that regulate the movement of ions, such as sodium and chloride, across the epithelial barrier. This process is important for maintaining the osmotic balance of the alveolar fluid and preventing the accumulation of fluid in the lungs (pulmonary edema).

The surfactant produced by alveolar type II cells consists mainly of phospholipids (such as dipalmitoylphosphatidylcholine, or DPPC) and surfactant proteins (SP-A, SP-B, SP-C, and SP-D). These components work together to reduce surface tension and maintain the stability of the alveoli.

The production and secretion of surfactant by alveolar type II cells are regulated by various factors, including mechanical stretch, glucocorticoid hormones, and certain signaling molecules (such as epinephrine and thyroid hormones). These regulatory mechanisms ensure that surfactant production is matched to the demands of respiration and the maintenance of lung function.